It’s a system that enables you to share a digital desktop between two various computer systems.

It’s a system that enables you to share a digital desktop between two various computer systems.

With one mouse and keyboard, you are able to get a grip on two computer systems, and also go your mouse in one desktop to another. It’s just like the computer systems are welded together. I’ll demonstrate. It’s this that my desk at home seems like whenever my desk is clean:

From the left-hand monitor we have actually an or windows 7 system running. In the right-hand monitor we operate Ubuntu 7.04 (Feisty Fawn). If We move my mouse off my Windows (left) monitor into the right, it turns up from the Ubuntu (right) monitor and vice-versa. Plus cut-and-paste works involving the devices too.

Here’s just how to configure Synergy with two computer systems. Let’s assume that you have got two house devices called “windowspc” and “ubuntu”. We’ll put the Windows device in the left in addition to Ubuntu machine in the right. One of the two machines will run given that Synergy host plus the other will run as being a Synergy customer. We picked the Ubuntu device to function as host.

  1. Install Synergy on both Ubuntu and Windows Ubuntu: Run the demand “sudo apt-get install synergy” Windows: down load the .exe system from supplyForge.
  2. As root in the Ubuntu device, create an /etc/synergy.conf file utilizing the demand “sudo vi /etc/synergy.conf”

There are several what to note in this setup file:

– If a person of the devices doesn’t have DNS title, you need to use the internet protocol address of this device. The “aliases” section lets you accomplish that in a clean method. To get your internet protocol address on or windows 7, do Start->Run, enter cmd, and type “ipconfig /all”. On Linux/Ubuntu, use “ifconfig” to get your machines’s internet protocol address.

– when you look at the “links” section, you need to determine both habits: going offscreen-left in the Ubuntu (right) machine, and going offscreen-right from the Windows (left) machine. The theory is that it is possible to produce mappings that are really weird but maintaining it easy is normally well.

– The “screenSaverSync = false” demand says to not ever connect the screensavers associated with the two devices.

– Synergy usually utilizes the “Scroll Lock” key being a toggle that stops your mouse from making the display. We have a KVM switch that utilizes the Scroll Lock key, thus I redefined the “lock Cursor to Screen” key up to a benign key (f12).

  • Make sure the Ubuntu configuration file is world-readable. Run the command “sudo chmod a+r /etc/synergy.conf” to achieve that.
  • Next, test the host and customer and ensure that everything works. Regarding the Ubuntu host, run “ synergys -f –config /etc/synergy.conf ” (that’s one dash at the ‘f’ and two dashes while watching ‘config’). The option that is“-f “run Synergy into the foreground” and it also allows you to see debugging as well as other Synergy messages. Observe that the demand is “synergys” since the ‘s’ is short for host. There’s also a synergyc to operate the customer.

    From the Windows client, run Synergy. You’ll need certainly to go into the name or internet protocol address of this Ubuntu Synergy host and then click Test. The Windows system shall seem like this:

    If you’re employing a KVM switch, don’t forget to move your mouse/keyboard back into the Synergy host operating on Ubuntu. The mouse/keyboard will be routed through Synergy to your Windows PC, which means that your KVM switch has got to be set towards the Synergy host.

  • If Synergy works fine in test mode, it is time for you to run it the real deal. Regarding the Ubuntu host, run the command “ synergys –config /etc/synergy.conf ” with two dashes in the front of ‘config’. That’s the command that is same you went before, except eliminate the “-f” option to operate within the foreground. In the Windows computer, follow on “Start” from the Synergy screen.
  • Finally, make Synergy run using both devices on start-up. On Windows, there’s an “Autostart” button. Click on the switch and select to begin Synergy either whenever you join or if the computer shoes up. For those who have adequate Administrator access liberties, I’d set Synergy to perform once the computer begins:

    Regarding the Ubuntu server, click System->Preferences->Sessions (or on more modern versions of Ubuntu, click System->Preferences->Startup Applications) and then click Add and work out a startup program (we called it “Synergy Server”) that operates the command “ /usr/bin/synergys –config /etc/synergy.conf “. Once more, that is two dashes as you’re watching term “config.”

    I really hope this guide helps. When you have Synergy going, it is incredibly cool to duplicate some text regarding the Ubuntu machine, mouse up to the Windows machine, and paste that text then on Windows.

    One tip that is final If you’re employing a KVM switch, remember which computer your keyboard/mouse is driving. That bit me personally a few times.

    Upgrade: Note to myself. I defined F12 because the key that is“lockCursorToScreen the config file above. For a Microsoft Natural Ergonomic Keyboard 4000, it’s likely you have to press the “F lock” or “Flock” button then F12 if you inadvertently locked your cursor to at least one display.